Checklist for Autobody Shop

Inspection Items	Legislation		Y*	N*	Corrective Action / Comments
Date	Act	Reg.*
Personal Protective Equipment
Eye protection		G* 39
Hearing protection		G 48 (1)
Respiratory protection (NIOSH approved for dust in the shop, NIOSH approved for organic vapors for primers or small touch-up jobs)		G 45 (1)- 47
Note; Respiratory protection must be of an air supplied type if workers using Isocyanate based products or is working in a sand blasting booth where silica is used
Facilities
Toilet		G 5 (1)
Washroom		G 6 (1)
First aid		G 12 (1)
Lunch room		G 7 (1)
Hand cleaning soap with moisturizing agent available?		G 6 (1)
WHMIS
Material Safety Data Sheets		W* 13 (1)
Labels (supplier, workplace)		W 7 (1)- 12 (4)
Training		W 5 (1)- 6 (4)
Ventilation
Source		G 24 (3)
General		G 20 (1)
Make up air		G 20 (4)
Storage of Paint and Thinners
Location		G 58-69
Containers closed		G* 60 (d)
Housekeeping		G 16
Paint mixing area
Local exhaust at floor level		G 24 (3)
Local exhaust at preparation bench and gun cleaning area		G 24 (3)
Check for presence of explosion proof electrical circuit outlets or lighting
Paint booth
Maintenance schedule on the exhaust filters and the exhaust unit (ducts checked and cleaned from accumulated paint)
Check for presence of explosion proof electrical circuit outlets or lighting
Disposal of materials
Method of disposal of hazardous materials		G 59 (a)
Hand Tools
Electrical Tools properly grounded or double insulated		G 83 (b) (i)
Guards on grinding tools		G 85 (a)
Electrical cords in good condition		G 80 (b)
Air lines and hoses in good condition		G 80 (b)
Oxygen and Acetylene Equipment
Check valves on regulators		G 78 (2) (d)
Tanks secured in upright position		G 76 (1 (d)
Condition of gauges valves		G 282 (1)
Welding and cutting done a safe distance from flammable substances		G 275 (1)
Hoists
Check service and inspection records		G* 211 (2) (a)
Condition on hoists		G 210 (1)
Check condition of floor jacks		G 211 (2) (a)
Check condition of jack stands