Checklist for Autobody Shop

 

Inspection Items

Legislation

Y*

N*

Corrective Action / Comments

Date

Act

Reg.*

 

 

 

Personal Protective Equipment

 

 

 

 

 

Eye protection

 

G* 39

 

 

 

Hearing protection

 

G 48 (1)

 

 

 

Respiratory protection (NIOSH approved for dust in the shop, NIOSH approved for organic vapors for primers or small touch-up jobs)

 

G 45 (1)- 47

 

 

 

Note;  Respiratory protection must be of an air supplied type if workers using Isocyanate based products or is working in a sand blasting booth where silica is used

 

 

 

 

 

Facilities

 

 

 

 

 

Toilet

 

G 5 (1)

 

 

 

Washroom

 

G 6 (1)

 

 

 

First aid

 

G 12 (1)

 

 

 

Lunch room

 

G 7 (1)

 

 

 

Hand cleaning soap with moisturizing agent available?

 

G 6 (1)

 

 

 

WHMIS

 

 

 

 

 

Material Safety Data Sheets

 

W* 13 (1)

 

 

 

Labels (supplier, workplace)

 

W 7 (1)- 12 (4)

 

 

 

Training

 

W 5 (1)- 6 (4)

 

 

 

Ventilation

 

 

 

 

 

Source

 

G 24 (3)

 

 

 

General

 

G 20 (1)

 

 

 

Make up air

 

G 20 (4)

 

 

 

Storage of Paint and Thinners

 

 

 

 

 

Location

 

G 58-69

 

 

 

Containers closed

 

G* 60 (d)

 

 

 

Housekeeping

 

G 16

 

 

 

Paint mixing area

 

 

 

 

 

Local exhaust at floor level

 

G 24 (3)

 

 

 

Local exhaust at preparation bench and gun cleaning area

 

G 24 (3)

 

 

 

Check for presence of explosion proof electrical circuit outlets or lighting

 

 

 

 

 

Paint booth

 

 

 

 

 

Maintenance schedule on the exhaust filters and the exhaust unit (ducts checked and cleaned from accumulated paint)

 

 

 

 

 

Check for presence of explosion proof electrical circuit outlets or lighting

 

 

 

 

 

Disposal of materials

 

 

 

 

 

Method of disposal of hazardous materials

 

G 59 (a)

 

 

 

Hand Tools

 

 

 

 

 

Electrical Tools properly grounded or double insulated

 

G 83 (b) (i)

 

 

 

Guards on grinding tools

 

G 85 (a)

 

 

 

Electrical cords in good condition

 

G 80 (b)

 

 

 

Air lines and hoses in good condition

 

G 80 (b)

 

 

 

Oxygen and Acetylene Equipment

 

 

 

 

 

Check valves on regulators

 

G 78 (2) (d)

 

 

 

Tanks secured in upright position

 

G 76 (1 (d)

 

 

 

Condition of gauges valves

 

G 282 (1)

 

 

 

Welding and cutting done a safe distance from flammable substances

 

G 275 (1)

 

 

 

Hoists

 

 

 

 

 

Check service and inspection records

 

G* 211 (2) (a)

 

 

 

Condition on hoists

 

G 210 (1)

 

 

 

Check condition of floor jacks

 

G 211 (2) (a)

 

 

 

Check condition of jack stands